CREAR TEST

TEST BORRADO, QUIZÁS LE INTERESE: Advanced Sensor Deployment Questions CCFA

COMENTARIOS	ESTADÍSTICAS	RÉCORDS

REALIZAR TEST

Título del Test: Advanced Sensor Deployment Questions CCFA Descripción: Advanced Sensor Deployment Questions CCFA Autor: David OTROS TESTS DEL AUTOR Fecha de Creación: 11/12/2024 Categoría: Informática Número Preguntas: 20

COMPARTE EL TEST

Comentar

No hay ningún comentario sobre este test.

Temario:

Which of the following is a prerequisite for successfully installing a Falcon sensor on a Linux machine? Ensure that the system's kernel version is compatible with the Falcon sensor The system must have a minimum of 8GB of RAM. The Falcon console must be installed on the same machine. The Linux machine must be using a static IP address. What is the recommended method for deploying Falcon sensors across a virtualized environment? Deploy sensors individually using the Falcon console for each virtual machine. Use a master image with the Falcon sensor pre-installed and configured with the NO_START flag. Install the Falcon sensor post-virtualization to avoid duplication. Apply a sensor update policy immediately after deploying the virtual machines. How does the Falcon sensor handle updates in an environment with limited bandwidth? It automatically compresses updates to minimize bandwidth usage. It queues updates and applies them during off-peak hours. It allows the administrator to throttle bandwidth usage during updates. It requires manual updates in such environments to avoid network congestion. What should be done if a Falcon sensor fails to install on a macOS device? Check for conflicting security settings, such as the macOS System Integrity Protection (SIP). Reinstall the operating system and attempt the installation again Switch to a manual installation method using a command-line tool Disable the firewall temporarily during installation. Which command can be used to troubleshoot Falcon sensor issues on a Windows machine? sc query csagent netstat -an | findstr "443" falconctl -status csagent -diag. What happens if a Falcon sensor is uninstalled without disabling tamper protection first? The sensor prompts for a maintenance token before uninstallation proceeds. The uninstallation fails, and the sensor remains active The sensor enters Reduced Functionality Mode (RFM) The uninstallation process is logged, but the sensor is removed. Which of the following settings must be configured to ensure successful sensor deployment on a large-scale Windows environment? Increase the default group policy refresh interval. Set up proper firewall rules to allow communication over port 443 Disable Windows Defender to prevent conflicts with the Falcon sensor. Ensure that all user accounts have administrative privileges. How can you verify that the Falcon sensor has been successfully installed and is operational on a host? Check the Falcon console for the host's status and sensor version Run a full system scan using the Falcon console. Verify the installation logs in the Falcon console. Execute the falconctl -status command on the host. What is the purpose of using the --provnowait flag during sensor installation? It allows the sensor to install without waiting for network provisioning It ensures that the sensor starts immediately after installation. It defers the sensor's registration until the host is rebooted. It prevents the sensor from communicating with the cloud during installation. Which of the following could cause a Falcon sensor to enter Reduced Functionality Mode (RFM) during installation? The sensor is installed on a non-supported operating system. The sensor fails to communicate with the Falcon cloud. The sensor is installed on a machine with a high-security configuration. The sensor is deployed using an outdated installer package. What is the maximum number of Falcon sensors that can be installed simultaneously using a single deployment method? 100 500 1000 There is no fixed limit, but network and system performance should be considered. Which Falcon sensor installation flag is crucial for preventing automatic sensor startup on virtual machine templates? NO_START=1 VDI=1 PROV_NOWAIT=1 --silent. What action should be taken if a Falcon sensor is not appearing in the Falcon console after installation? Restart the host machine to ensure the sensor service starts correctly. Reinstall the sensor using a different installer package. Verify that the host can communicate with the CrowdStrike cloud via port 443. Disable tamper protection and attempt the installation again. Which of the following is required for deploying Falcon sensors on macOS devices running Apple Silicon (M1) chips? Installing Rosetta 2 to ensure compatibility. Configuring the sensor to run in a virtualized environment. Disabling Secure Boot on the device. Installing a custom kernel extension for the sensor. What should be done if a Falcon sensor is incorrectly configured during deployment and fails to communicate with the cloud? Adjust the firewall settings to allow outbound traffic on port 443. Reconfigure the sensor using the Falcon console’s troubleshooting tools. Uninstall and reinstall the sensor with the correct configuration Apply a manual update to the sensor to fix the communication issue. Which step is necessary to ensure a Falcon sensor can be deployed successfully in a high-security environment with strict firewall rules? Pre-configure the firewall to allow outbound communication to specific CrowdStrike cloud addresses. Temporarily disable the firewall during sensor deployment. Use a dedicated deployment server within the secure network. Install the sensor in reduced functionality mode and upgrade later. What command can be used on a Linux machine to initiate the Falcon sensor manually if it does not start automatically after installation? systemctl start falcon-sensor service falcon start falconctl --start service falconctl start. Which scenario might require the use of an installation token when deploying Falcon sensors? When deploying sensors in a multi-tenant environment where each tenant needs separate tokens. When installing the sensor on servers located in different geographic regions. When deploying sensors across a large number of endpoints with varied network configurations. When performing sensor updates via the Falcon console. How can you prevent the Falcon sensor from being uninstalled on critical systems? Enable uninstall protection and configure a maintenance token. Lock the sensor settings using a system policy. Apply a custom sensor update policy that disables uninstall commands. Set the sensor to run in stealth mode. What might cause the Falcon sensor to fail during installation on a Windows Server operating system? The server is running a deprecated version of the .NET Framework. The server is using an unsupported file system The server's UAC (User Account Control) settings are too restrictive. The server is running in a non-Active Directory domain.

Denunciar Test