CREAR TEST

TEST BORRADO, QUIZÁS LE INTERESE: avionica

COMENTARIOS	ESTADÍSTICAS	RÉCORDS

REALIZAR TEST

Título del Test: avionica Descripción: OVEN SERIES Autor: rino OTROS TESTS DEL AUTOR Fecha de Creación: 17/10/2024 Categoría: Otros Número Preguntas: 29

COMPARTE EL TEST

Comentar

No hay ningún comentario sobre este test.

Temario:

What type of material is the inner oven made of? Stainless steel Aluminum Plastic Glass . Which part of the oven assembly is made of light-weight plastic? Frame Assembly Door Assembly Secondary Latches Water Container Assembly . What is the purpose of the Outer Case Assembly? "To provide protection to the inner oven" "To regulate the temperature inside the oven" To circulate hot air in the oven To hold the transport handle . Where is the Oven Control Module (OCM) installed? In the inner oven In the outer case In the rear cover plate "In the OCM compartment at the front side of the unit" . What does the thermo fuse assembly provide protection against? Unexpected overheat Power failure Water leakage Overcooling . What is the function of the net-filter assembly? "To improve the EMI properties of the oven" "To control the pressure in the oven cavity" "To provide protection against overheating" To circulate hot air in the oven . What does the cooling fan do when the unit is energized? Reduces the temperatures around the electronic components Increases the temperatures around the electronic components Provides additional airflow in the oven Circulates water in the plumbing system . Where is the optical door sensor installed? On the rear cover plate assembly On the frame assembly "On the top of the OCM guiding assembly" On the inner oven . What is the purpose of the water container assembly? "Supplies potable water to the water system of the unit" Drains water from the oven cavity "Cools down the electronic components" "Provides additional insulation to the unit" . "Which valve assembly controls the water injection into the oven cavity?" NC Valve Assembly NO Valve Assembly Solenoid Water Pump Condenser . What does the drain-out valve (V3) do during the cooking cycle? "Drains the water that is present in the condenser" "Controls the pressure in the oven cavity" Injects water into the oven cavity "Drains water from the water container assembly" . "When does the water pump (V1) start to pump repeated shots of water into the oven cavity?" "When the oven cavity reaches a temperature of ± 100°C" When the steam-out valve (V4) closes When the drain-out valve (V3) opens When the cooling fan is activated . What is the purpose of the final test on the Unit Under Test (UUT)? "To determine the modification status of the unit" To verify the error log To do the power-up test To ensure the unit is ready for service . What does the Airline Setting Package (ASP) support? "All the software and publications for the Unit Under Test (UUT)" The installation of the unit The maintenance tasks of the unit The modification of the unit . What should be done to verify the modification status of the unit? "Examine the Modification Record Placards and/or Amendment Placard of the unit" Apply an amendment placard to the unit Remove the OCM from the UUT Start the power supply to energize the UUT . What is shown on the display during the power-up test? "HMI / PWR software version and the green “Ready” light" Error messages Temperature readings Cooking program time . What type of language is the CMM written in? English French Spanish Simplified Technical English (STE) . "What manual structure section provides a list of all the major sub- divisions and illustrations in the CMM?" Front pages (TOC) Introduction (INTRO) List of Effective Pages (LEP) List of Sections . What is the purpose of the Transmittal Sheet (TS)? It gives a list of revised pages with brief descriptions of revisions. It provides filing instructions for all the supplied pages. It contains the latest revision status and revision history of the CMM. It contains the manufacturer's masthead and initial issue date. . "Which part number system element identifies the configuration code of the unit?" 2nd element (XX) 1st element (43XXXXX) 3rd element (XX) 4th element (XX) . What is the function of the Maintenance Task Oriented Support System (MTOSS)? "Permits the use of Electrical Data Processing (EDP) of maintenance data." Organizes maintenance tasks and sub tasks logically. Provides automated sorting, retrieval, and management of digitized data. All of the above . How many elements does an MTOSS number have? Seven Five Six Four . What type of system is the plumbing system? Closed-loop system Open-loop system Hybrid system None of the above . Which valve assembly controls the pressure in the oven cavity? NO Valve Assembly NC Valve Assembly Solenoid Water Pump Condenser . When does the drain-out valve (V3) open during the operation of the plumbing system? When the oven cavity reaches a pressure of ± 55 millibar [0.8 psi]. When the oven cavity temperature is more than ± 100°C [212°F]. When the drain-out valve (V3) de- energizes. When the cooling fan is activated. . What is the purpose of the drain-out valve (V3)? "Drains the water that is present in the condenser to return the kept water back to the oven cavity." Controls the pressure in the oven cavity. Injects water into the oven cavity. Drains water from the water container assembly. . What does the Airline Setting Package (ASP) contain? "All the software and publications for the Unit Under Test (UUT)." "The installation instructions for the unit." The maintenance tasks for the unit. "The modification procedures for the unit." . What is the purpose of the Transmittal Sheet (TS)? To give a list of revised pages with brief descriptions of revisions. To provide filing instructions for all the supplied pages. To contain the latest revision status and revision history of the CMM. To contain the manufacturer's masthead and initial issue date. . What is the function of the Maintenance Task Oriented Support System (MTOSS)? "To permit the use of Electrical Data Processing (EDP) of maintenance data." To organize maintenance tasks and sub tasks logically. "To provide automated sorting, retrieval, and management of digitized data." All of the above .

Denunciar Test