C_TPLM30_67

To which maintenance object type can you assign a user status profile?. Measuring point category. Maintenance plan category. Equipment category. Task list type.

Where do you activate change documents for maintenance plans?. In the maintenance plan category Customizing settlings. In the maintenance plan header. In the maintenance plan Customizing settlings. In the maintenance task list type Customizing settlings.

What must you do to use an internal refurbishment process? (2 correct). Create a specific maintenance activity type for refurbishment. Create a specific settlement profile for the purpose of refurbishment. Create a special control key to use in the refurbishment operation. Create a specific order type for refurbishment.

Which settings can you configure for a notification type in Customizing? (3 correct). Maintenance activity type. Settlement rule. Status profile. Number range. Partner determination profile.

Which of following operations can you perform for maintenance order with the status 'technically complete' (TECO)? (3 correct). Perform business completion. Change the responsible work center. Debit the maintenance order with additional actual cost. Add new components. Change settlement rules.

You want to create digital signatures for maintenance order operation. Which parameters do you have to specify in Customizing?. Order type and planning plant. Order type and maintenance plant. Order type and planner group. Order type and work center.

You want to define the search sequence for viewable files. Which workstation application do you have to assign to the Visual Instructions viewing application?. AVI. JT. BMP. RH.

You are creating a performance - based maintenance plan. What must you assign to the plan? (2 correct). A task list has a performance - based maintenance strategy assigned. A technical object with a measure point. A cycle unit of measure matching the characteristic assigned to the measuring point. A start counter reading for scheduling.

What do the initial and subsequent buffers in the preventative maintenance strategy determine?. The difference between the call date and plan date. The next maintenance call date. The basic dates for a maintenance order. The shifting of the next call date based on the TECO date.

You want to define the organizational units for you maintenance department. Which of following objects can you assign to a planning plant?. Location. maintenance planner group. maintenance work center. Company code.

While creating a measuring point for a piece of equipment, you cannot maintain the unit of a measure of the measuring point. What is the reason?. The measuring point references the unit of measure from the characteristic. The unit of measure can only be entered during the creation of a measurement document. The measuring point references the unit of measure from the capacity header of the work center assigned to the piece of equipment. Units of measure have not been configured for the measuring point category in Customizing.

In your maintenance plan the scheduling period is set to zero. You want to schedule the maintenance plan via deadline monitoring and set the interval for call object to zero. How does the system behave during scheduling?. A new planned date is added when the current waiting call is converted to a call object. A new call object is generated outside the call horizon. A set of new call object is generated for all maintenance plan cycles outside the call horizon. A new planned date is schedule within the call horizon.

To which objects can you assign personnel numbers? (2 correct). Task list operations. Individual capacities. Partners. Work centers.

Which steps must you perform to prepare a task list to use a maintenance strategy? (2 correct). Assign maintenance packages to task list operations. Set a buffer for each maintenance packages in the strategy. Assign a maintenance strategy to task list operations. Assign a maintenance strategy to task list header.

You have configured a new labeling system and assigned alternative labels to the functional locations. However, the old labels are still displayed in the list display for the functional locations. What can you do to display the new labels?. Change the screen layout to include the alternative label field. Delete the labels in the old labeling system. Enter the new labeling system in your user profile. Make sure the new labels are entered in your logon language.

What is the difference between a refurbishment order and a repair maintenance order?. A refurbishment order is settled to different cost center and a repair maintenance order is NOT. A goods issue can be posted against a refurbishment order but NOT against a repair maintenance order. A goods receipt is posted against a refurbishment order but NOT against a repair maintenance order. A refurbishment order is always created for one material/serial number combination. A repair maintenance order can be created for non-serialized materials.

To which of the following objects can you assign a catalog profile? (3 corrects). Equipment master record. Notification item. Notification type. Function location master record. Equipment category.

Where do you define the offset for the maintenance plan strategy?. In the maintenance item of the maintenance plan. In the maintenance plan category. In the maintenance plan scheduling parameters. In the maintenance plan package.

What are prerequisites for using the measurement reading transfer function?. The characteristic assigned to the measuring points must be assigned to the same class. The code group assigned to the measuring points must be identical. The measuring points must be assigned to the same characteristic. The measuring points must have the same number of digits.

Your customer wants to generate a cost estimate using the Maintenance Plan Costing transaction? Which of following costs can be determined (3 corrects). Cost for active maintenance dates. Cost for a specified period. Cost for specified technical objects. Cost for skipped calls. Cost for waiting planned dates.

Which business functions do you have to set up when customizing the inspection control of the availability check for each combination of plans and order type?. Availability check during order creation Availability check during order release. Material availability check Production Resources/ Tools availability check. Availability check during goods issue Availability check during goods receipt. Material availability check Capacity availability check.

Which standard report do you use to monitor spare parts planning in ongoing maintenance order? (2 corrects). Order and operation list. Controlling report for orders. Material where-used list. Material availability list.

How can you change the layout of an equipment master record? (2 corrects). Add additional business view to the equipment category. Assign the view profile to the equipment reference category. Assign the view profile to the equipment category. Assign the default catalog profile to the equipment reference category.

To which of the following can you assign a maintenance activity type? (2 corrects). A maintenance order operation. A technical object. A maintenance order type. A task list.

How do you activate sub-screens in Customizing for equipment master data?. Define the field selection for equipment master records. Create a screen group and assign this group to the equipment category. Create a view profile and assign this profile to the equipment category. Active the classification active indicator when defining additional business views.

What must you create to process maintenance order for external companies using external work centers? (2 corrects). A catalog for external services. A planner group for the external company. A cost center for the external company. An activity type for each change rate.

You are configuring maintenance plan categories in Customizing. Which of the following settings can you make? (3 corrects). External number range. Completion data. Call object. Maintenance activity type. Planner group.

Which object do you link to value categories while customizing a maintenance order type?. Cost element. G/L account. Cost center. Activity type.

You want to outsource a maintenance order operation. For the operation you require the outside company to submit time sheets for approval. What must you define?. A control key with the confirmation parameter set. The parallelize confirmation processes. A control key with the service parameter set. A default value profile for external procurement.

You want to system to display an error if you to close or set the deletion flag when the balance of order is NOT zero. Which indicator must you set in the settlement profile?. The 100 validation indicator. The amount settlement indicator. The to be settled in full indicator. The variances to costing indicator.

Which of the following order type settings are plant independent? ( 2 corrects). Settlement profile. Scheduling parameters. Material availability check. Number range.

What does a structure indicator define? (3 corrects). The hierarchy levels of the function location structure. The characters that are allowed for the location number. The external number range for function location. The functional location category. The maximum length of function location number.

A production planner wants to display all pending maintenance orders for a PP work center in the PP planning board. What must you do to achieve this? (2 corrects). Set the system condition in the maintenance order header. Set the system condition in the technical object master record. Assign the PP work center to the technical object master record. Assign the PP capacity planner group to the maintenance work center.

Which of the following must you assign to use a cross-plant planning scenario?. Multiple maintenance plants to a planning plant. A planner group to multiple maintenance plants. Multiple planning plants to a maintenance plant. A planner group to multiple planning plant.

You customer wants to make sure that a piece of equipment with status 'AVLB' has passed testing prior to being installed in a functional location. How can you achieve this? (2 corrects). Customize a permit category and assign in to the equipment category. Customize the equipment category as test equipment and use the system status to control the installation. Customize an appropriate status profile and assign in to the equipment master. Customize an appropriate status profile and assign in to the equipment category.

What are the scheduling parameters for a strategy plan? (3 corrects). Offset. Strategy. Start in cycle. Time – key data. Shift factor late completion.

To which objects can you assign a responsible maintenance work center? (2 corrects). The maintenance plan header. A maintenance item. The header of Bill of Material. The header of a task list.

If two maintenance packages are due at the same time, what parameter defines which maintenance packages is performed?. Initial buffer. Cycle length. Offset. Hierarchy.

For which of the following business processes are serial number a prerequisite?. Performing an internal refurbishment process. equipment and dismantling pieces of equipment. Tracking material items as pieces of equipment. Tracking the warranty pf a pieces of equipment.

You customer wants to serialize equipment. Which customizing parameters can you use for serial number profiles? (3 corrects). Automatic synchronization to Asset Accounting. Automatic creation of serial numbers. Assignment to equipment category. Determination of business transactions for which a serial number check is performed. Determination of the material type assigned to the equipment category.

You want to customize the settings for functional location to map your technical asset in the system. Which of the following do you have to define when creating a structure indicator? (2corrects). functional location category. Labeling system. Hierarchy levels. Edit mask.

For which objects can you set default values in a maintenance order value profile? (2corrects). G/L account. Purchasing group. Cost element. Material.

Your customer wants to assign maintenance notification to maintenance order operation. Which of following Customizing steps must you perform to achieve this?. Assign the order type in the special notification parameters. Set up control key that allows the assignment of notification and use it in the maintenance order operation. Set the indicator for notification data on order header data to active for order type and notification type combination. Set the indicator for enhanced object list functions to assignment of operations to all object list entries active.

You want to set up your maintenance work centers to monitor their work load. Which of following must you assign to the maintenance work center?. Factory calendar. Control key. Capacity planner group. Maintenance planner group.

Which objects can you assign to a maintenance order operations as a Product Resource Tool (PRT)? (3 corrects). Functional Location. Material. Serial number. Measuring point. Equipment.

Which of following is an element of Information Structure?. Dimension. Info Source. Characteristic. Class.

What must you do to use mass changes for technical objects? (2 corrects). Activate the relevant business function. Assign the relevant authorization object to users. Activate mass changes for the planning plant. Activate mass changes for the relevant categories for the equipment or functional location.

In which maintenance business process can you use value categories?. Measurement document creation. Order cost view. Order settlement. Condition-based material valuation.

You set the status of a maintenance order to 'technically complete' (TECO). What is the result (2 correct). The order can still receive costs. The settlement rule CANNOT be changes in the future. Open reservations are closed. Operations can be added to maintenance order.

Which of following objects can you assign to an operation in a maintenance task list? (3 correct). Service packages. Visual instructions. Requirements profile. Production Resources /Tools (PRT). Serial numbers.

For a multiple counter maintenance plan, where do you control where do you whether a maintenance order is created when all cycles are due or as soon as one cycle is due?. In the Customizing settings of the maintenance plan category. In the selection criteria of the deadline monitor. In the cycle set used in the maintenance plan. In the scheduling parameters of the maintenance plan.

Which of following can you assign to the function location category? (2 correct). Measuring point category. Indicator from configuration control data. Indicator from customer objects in a customer system. Asset class.

For which fields can the system propose default values for operation during the order confirmation? (3 correct). Final confirmation. Goods movement for non-stock items. Start date. Activities. Maintenance order settlement.

After releasing a maintenance order you check the material availability list. What does a yellow traffic light indicate?. Non-stock material is available for the earliest date. Non-stock material is available for the planned date. Stock material is available for the earliest date. Non-stock material is available for the latest date.

How can you enter a time confirmation for a maintenance order?. Create a Cross-Application Time Sheet. Set the status of the maintenance order to TECO. Enter a technical confirmation. Enter a final time confirmation at order header level.

What can you do with a multiple counter plan? (2 correct). Use cycles of multiple dimensions. Propose counter for the reference object based on cycles entered. Use multiple time-bases counter. Assign a strategy for common dimensions.

Even though material has been issued against a maintenance order, the balance of actual costs in the maintenance order is zero. What could be the reason?. The material was issued without reference to the reservation. The operation to which the material is assigned has NOT been confirmed. The material was issued in the previous fiscal period. The order has been settled.

Why do you define maintenance assemblies of material type IBAU? (2 correct). To enable cost reporting in the Plant Maintenance Information System. To combine similar materials under one node in a Bill of Material. To track materials from an inventory management perspective. To enable a refurbishment process with split valuation.

You are customizing orders for Test Equipment Management. Which of following actions are mandatory? (2 correct). Define follow-up actions. Define inspection methods. Assign the inspection type to the order type. Define an inspection point.

After parts have been transferred to a subcontractor, which of following indicates defective pats in the SAP system?. A special storage location. A special stock type. A special condition–based valuation type. A special batch number.

Which of the following objects can you assign to a maintenance work center master record? (2 correct). Task list usage. Capacity category. Maintenance activity type. Planner group.

What is the result when performing a counter replacement?. The total counter reading is reset to zero. The counter assigned to the technical objects is replaced. The total counter reading of the measurement document stays the same. The technical object with the assigned defective counter is replaced.

What is the latest point in time you can configure the order settlement rule to be mandatory during order processing?. At order creation. Before technical completion. Before order settlement. Before order release.

When a maintenance plan is used to create an order, how can you prevent the order from being released immediately? (2 correct). Configure the order type to NOT release immediately. Configure the combination of order type and planning plant to NOT release immediately. Set the DO not release immediately flag in the maintenance plan header. Set the DO not release immediately flag for the maintenance item.

You have created a new maintenance order type in Customizing. Which settings must you make to enable order scheduling?. Assign a default value profile for general order data. Assign scheduling parameters to the order type only. Assign a calendar to the order type. Assign scheduling parameters to the combination of plant and order type.

When does the system create a distribution rule for a maintenance order automatically? (2 correct). After the maintenance order is set to TECO. When the maintenance order is released. When the maintenance order is to TECO. Before the maintenance order is released.

What is a prerequisite to settle a refurbishment order to the material stock?. The default account assignment in the settlement profile assigned to the order type must be set to the G/L account that is linked to the material. The price control of the material to the refurbishment must be set to 'standard price'. The default account assignment in the settlement profile assigned to the order type must be set to the 'material'. The price control of the material to be refurbishment must be set to 'moving average price'.

You want the system to ignore the actual dates of a partially confirmed operation when the maintenance order is scheduling manually. Which scheduling parameter must you set to active in Customizing?. Scheduling with breaks. Adjust dates. Shift order. Scheduling type.

What is the purpose of deadline monitoring?. To display a capacity overview for generated maintenance orders. To convent maintenance calls into notifications for a predefined period. To convent notification into orders for a predefine period. To provide an overview of scheduled and manual call dates.

Which of following steps is mandatory for the cost update in the Plant Maintenance Information System. Select value categories for the costing sheet. Assign update groups to PM order types. Define update rules for the DataSource. Assign value categories to cost key figures.

What is a requirement for scheduling maintenance order operations?. The order operation must have a control key with the Scheduling Operations indicator set. The value for actual work in the order operation must be greater than 0. The performing work center must have a control key with the Scheduling Operations indicator set. The value for the order operation must be greater than 0.

What is the difference between the maintenance activity type and cost controlling (CO) activity types? (2 correct). The maintenance activity type is maintained in the order header CO activity types are is maintained in the order operations. The maintenance activity type is used to calculate overhead costs CO activity types are used to calculate operational costs. The maintenance activity type is used to post actual costs during order confirmation at the header level CO activity types are used to post actual costs during order confirmation at the operational level. The maintenance activity type is defaulted from the maintenance plan CO activity types are defaulted from the work center.

Which of following organizational units are mandatory to enable the integration of Enterprise Assent Management and Controlling? (2 correct). Business area. Profit center. Cost center. Controlling area.

You want to dismantle equipment with simultaneous goods movement. What are the prerequisites? (3 correct). A serial number must be assigned to the serial data tab of the equipment master record. The functional location master record must allow the installation. The equipment category must allow the installation. The material assigned to the Serial Data tab must use split valuation. The category of functional location must allow the installation.

Which of the following objects have linear data related fields? (2 correct). Object network. Measuring point. Material serial number. Task list.

When is a maintenance order debited with actual overhead costs?. With each consumption posting. When the order is TECO. When the order is settled. When you trigger the surcharge calculation.

Which indicators can you set in Customizing for assigning a task list to a maintenance order type? (2 correct). Work center. Production Resources /Tools. Operation. Material.

Which settlement receivers can you assign to a settlement profile? (2 correct). Material. Cost element. Equipment. G/L account.

What are prerequisites to assign a task list to a time-based maintenance plan? (2 correct). The task list header must be assigned to the same maintenance strategy as the maintenance plan header. The task list and maintenance plan item must be assigned to the same planner group. The task list header and maintenance plan item must be assigned to the same planning plant. The same work center must be assigned to the task list header and the maintenance plan item.

You want to configure the setting for time-based maintenance plans with the call object type 'maintenance order'. Which objects does the system use to determine the orders to be called?. Planning plants and Maintenance planner group. Maintenance plant and main work center. Maintenance plant and activity type. Maintenance planner group and activity type.