Cuestionario F-60

1. Which of the following is NOT required to be safely covered at the hot work area or be removed from the area?. A. Papers. B. Fabric. C. Wood shavings. D. Metal boxes.

2. What class of extinguisher should be used to suppress a flammable and combustible liquid fire? (G-60/F-60). A. Class B. B. Class A. C. Class D. D. Class C.

3. Which of the following is most likely to accidentally cause fire when using a torch?. A. non-combustible material. B. slags. C. a limited LPG supply to the torch. D. the friction device.

4. Hot work authorization must be maintained on the premises for a minimum of _____ after work is complete. (F-60). A. 1 week. B. 48 hours. C. 24 hours. D. 3 days.

5. Which of the following is correct (G-60/F-60). A. The Certificate of Fitness holder must know how to operate the extinguisher safely. B. Only the torch permit holder can perform the monthly “ quick check “ of the extinguishers. C. The fire extinguisher must be placed at least 30 feet away from the fire guard. D. The Certificate of Fitness holder is not required to know the difference between the various types of extinguishers.

6. A fire watch must be maintained during a LPG torch-applied roof operation. The fire watch must continue for a minimum of _____. A. 30 minutes after the conclusion of the hot work and have a second inspection at 3 hours after the conclusion of the hot work. B. 2 hours after the conclusion of the hot work. C. 30 minutes after the conclusion of the hot work and have a second inspection at 1 hour after the conclusion of the hot work. D. 10 minutes after the conclusion of the hot work.

7. During a hot work operation, the fire alarm system_____. (F-60). A. must not be taken out of service. B. is allowed to be taken out of service and the fire watch for torch operation will not be required. C. is allowed to be taken out of service, but fire watch for impairment must be provided. D. must not be taken out of service, but additional fire watch for impairment is required.

8. What type of fire extinguisher is legally required at all locations where hot work is performed (G-60/F-60). A. Type BC. B. Type AD. C. Type D. D. Type A.

9. Fire watch must be maintained during any hot work operation. The fire watch must continue for a minimum of _____. A. 2 hours after the conclusion of the hot work. B. 1 hour after the conclusion of the day. C. 4 hours after the conclusion of the hot work. D. 30 minutes after the conclusion the hot work.

10. How long is the FDNY permanent site-specific permit valid for? (F-60). A. 6 months. B. 24 months. C. 12 months. D. 18 months.

11. a spot fire caused by hot work is extinguished immediately, the fire guard_____. A. does not need to notify anyone. B. must notify the Fire Department. C. must make announcement to the building occupants. D. must notify the Building Department.

12. A must an additional fire guard be provided for the torch-applied roof operation? (G-60). A. When there is a construction site fire safety manager presented. B. When the torch operation is being conducted at the edge of a location where slag will travel to the lower floor. C. When the construction operation is not in progress. D. When the torch operation is completed.

13. What class of extinguisher should be used to suppress an ordinary combustible material (e.g. paper,cardboard ) fire? (G-60/F-60). A. Class C. B. Class B. C. Class A. D. Class D.

14. Select the correct statement regarding the citywide permit. (F-60). A. A citywide permit might authorize the permit holder to store LPG for 30 days. B. A citywide permit is only allowed to work at a specific location. C. All citywide permits are valid up to one year. D. A citywide permit is not transferable to a different owner.

15. Which is a correct statement regarding the Fire Department permits and Certificates of Fitness? (F-60). A. Permits shall be stored off-site for safety reasons and Certificates of Fitness shall be carried by the holders. B. Both of them shall always be stored off-site for safety reasons. C. Permits shall be posted and Certificates of Fitness shall be stored off-site for safety reasons. D. Both of them shall be readily available on the premises.

16. Fire guard must NOT _____. A. use garden hoses connect to a water supply. B. carry a fire extinguisher. C. assist the torch operations. D. extinguish the ignition of combustible materials.

17. Combustible materials must be kept away from a welding or cutting operation area at minimum distance. A. 10 feet. B. 25 feet. C. 50 feet. D. 35 feet.

18. Torch- applied roof system must NOT be operated on _____. A. roofs/sub roofs that are made of wood. B. roofs/sub roofs that are made of metals. C. roofs/sub roofs that are made of bricks. D. roofs/sub roofs that are made of concrete.

19. Select the correct procedure used to operate a fire extinguisher (G-60/F-60). A. 1st Pull the pin from handle 2nd Aim at base of fire 3rd Squeeze the lever 4th Sweep side to side. B. 1st Snake side to side 2nd Pull pin from handle 3rd Aim at base of fire 4th Squeeze the lever. C. 1st Snake side to side 2nd Pull the pin from handle 3rd Aim at top of fire 4th Squeeze the lever. D. 1st Pull the pin from handle 2nd Aim at top of fire 3rd Squeeze the lever 4th Sweep side to side.

20. Hot work authorization is issued by……….(F-60. A. Fire Department. B. Department of Environmental Protection. C.Building Department. D.responsible person.

21. Select the correct statement regarding the “quick check” record/tag of a fire extinguisher. A. The inspection record must be posted on the wall. B. The inspection record can be kept on an inspection checklist maintained on file. C. The inspection tag must be orange in color. D. The manufacturer toll free number must be included on the inspection tag.

22. If any sprinkler head is protected by barriers during torch operation (F-60). A. remained 48 hour after the completion of the hot work. B. remained 24 hour after the completion of the hot work. C. removed at the end of each workday. D. removed only when the hot work is completed.

23. Select the INCORRECT statement regarding the logbook / inspection report content. A. The name of the premise owner must be listed. B. The deficiencies discovered should be noted. C. The presence of fire extinguisher should be recorded. D. The name of the fire guard who performs the inspection must be entered.

24. Which of the following location does NOT require at least one fire guard to perform fire watch torch operations. A. Inside a building with a citywide permit for torch operations. B. On a flat roof. C. In a small construction site. D. At a fixed workstation in a factory.

25. How often should the “quick check” of a fire extinguisher be performed (G-60/F60). A. Quarterly. B. Semi- annually. C. Annually. D. Monthly.

26. A fire watch must be maintained during a LPG torch - applied roof operation. The fire watch must continue for a minimum of. A. 30 minutes after the conclusion of the hot work and have a second inspection at 1 hour after the conclusion of the hot. B. 2 hours after the conclusion of the hot work. C. 30 minutes after the conclusion of the hot work and have a second inspection at 3 hours after the conclusion of the hot work. D. 10 minutes after the conclusion of the hot work.

27. The fire guard MUST. A. ensure that sparks of hot metal do not. B. oversee more than 2 torch operations. C. recharge the fire extinguisher. D. operate the torch if the torch is applied on a.