DES-DD23

Refer to the exhibit. To which shelf and port should SAS HBA slot 1 port B be connected?. Shelf 04 BH. Shelf 01 BH. Shelf 04 BE. Shelf 01 BE.

When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?. SMBTimeout to 7200 seconds. CIFSTimeout to 3600 seconds. SESSTIMEOUT to 7200 seconds. SESSTIMEOUT to 3600 seconds.

What is the maximum capacity for a DDVE?. 64 TB. 96 TB. 128 TB. 256 TB.

A technician is upgrading a DD9400 with a DS60 expansion shelf with 60 drives. In the GUI interface, only 30 drives are accessible. What is causing these drives to be inaccessible?. There are not enough cache drives on the DD9400 to support the extra capacity. A second SAS connection from DD9400 to DS60 is not activated. There are not enough spare drives. The capacity license applied is only for 30 drives.

What is a requirement to configure the PowerProtect DD tape out to cloud feature?. Two cloud units. Cloud Tier Capacity License. Tape Out to Cloud License. DDVE in the Cloud.

A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GB. What is the minimum tape type to support this requirement?. LTO-5. LTO-3. LTO-2. LTO-4.

A customer needs an upgrade on their DD6900 to use HA. Which expansion shelf is required?. ES40. FS25. DS60. ES25.

When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?. Offsite. Offline. Archived. Vaulted.

An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible. What is the most likely cause of this behavior?. Migration will restrict all activities on source systems. Migration will restrict all activities on both systems. Filesystem is disabled on source system. Source system is running in restricted mode.

An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?. 120. 240. 300. 500.

A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state. As a best practice, at what percentage of disk utilization should action be taken?. 60%. 70%. 80%. 95%.

Which enterprise applications does the DDBEA agent support?. Oracle, Microsoft Sharepoint, and Microsoft SQL. Microsoft SQL, Sharepoint, and Exchange servers. SAP with Oracle, IBM DB2, and Microsoft active directory. IBM DB2, Microsoft SQL, and SAP HANA.

An administrator is configuring a Google Cloud Provider cloud unit on their DD9900. Which certificate must be imported before adding the cloud unit?. S3 Flexible. Root CA. GlobalSign Root R1. GlobalSign Root R2.

Backup administrators have noticed slow backups on the AIX environment. To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?. no and nfs_rfc1323=0. yes and nfs_rfc1323=0. no and nfs_rfc1323=1. yes and nfs_rfc1323=1.

An administrator is configuring an Azure cloud unit on their DD6900. Which certificate must be imported before adding the cloud unit?. GlobalSign Root R2. GlobalSign Root R1. S3 Flexible. Baltimore CyberTrust Root CA.

Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?. CIFS and NFS. FTP and FTPS. VTL and DD Boost. HTTP and HTTPS.

What are some key benefits of performing backups and recoveries with a PowerProtect DD appliance?. Reduction in the overall size and scope ; Elimination of physical tape; Fewer copies that need to be tracked; Increased speed of disaster recovery. Increase in the overall size and scope; Elimination of physical tape; Fewer copies that need to be tracked; Increased speed of disaster recovery. Reduction in the overall size and scope Elimination of physical tape Number of copies that do not need to be tracked Increased speed of disaster recovery. Increase in the overall size and scope Elimination of physical tape Number of copies that do not need to be tracked Increased speed of disaster recovery.

A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained. Which PowerProtect DD systems meet the customer's requirement?. DD3300, DD6900, and DD9400. DDVE, DD3300, and DD6900. DD6900, DDVE, and DD9400. DD9400, DDVE, and DD9900.

When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically. Which command can be used to start the script manually?. configure terminal. config setup. setup config. config wizard.

What are some possible network bottlenecks for a PowerProtect DD?. Configuration, wire speeds, switches and routers. Connectivity, routing protocols, and configuration. Connectivity, firewalls, and routing protocols. Routing protocols, switches and routers, and wire speeds.

What can be used to monitor system utilization?. Health tab in the System Manager GUI. system show performance command. Alert Messages. system status command.

Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?. SSH. SSL. FTP. HTTPS.

A backup administrator has enabled the Retention Lock feature on their PowerProtect DD appliance. Over time, the administrator noticed an increase in file system utilization. Upon further investigation, the administrator discovered expired files are still present on the appliance. What is the most likely reason for this issue?. The time of the file was set below the minimum retention period. Retention Lock feature was disabled before the expiration date. File system cleaning was disabled. Backup application failed to delete the file after expiration.

A customer needs a backup system to protect 100 TB of mission-critical data. What should be used to back up the system?. cloud tier. DD6900. DD3300. DDVE.

A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900. Which compression algorithm will they see enabled by default?. lzw. gzfast. lz. gz.

Which PowerProtect DD procedure uses the DoD/NIST standards to provide data security?. Data Sanitization. End-to-End Verification. Replication Encryption. Encryption.

Which component executes the read/write requests in a backup environment consisting of a PowerProtect DD appliance and IBM Spectrum Protect?. Spectrum Protect Server. Media Server. Media Agent. Master Server.

Which component of PowerProtect DD is Data Invulnerability Architecture a feature of?. VTL. DDOS. DD Boost. CIFS.

Which are supported compression algorithms in DDOS?. lz, gz, and gzfast. dsp, gz, and lz. rle, lzw, and lz. bmp, lz, and gz.

What happens to the data when it is moved from the active tier to cloud tier?. It is deduplicated and stored in object storage the native format. It is compressed and stored as object storage in a new format. It is compressed and stored in block storage in a new format. It is deduplicated and stored in a file system in the native format.

An administrator recognizes poor network performance when using CIFS shares from a PowerProtect DD system. The network link utilization is under 100%. What is the most likely cause of this issue?. TCP window size too small. TCP timeout too small. TCP timeout too large. TCP window size too large.

A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack. When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?. Expansion port of the upstream shelf. Host port of the controller. Expansion port of the controller. Host port of the downstream shelf.

Which command is used to start the initial CLI configuration wizard?. config setup. install config. config. setup.

Which port/protocol is used when using a syslog server to monitor a PowerProtect DD system?. 514/UDP. 2051/TCP. 514/TCP. 2051/UDP.

What system role is required to create the second security officer for a PowerProtect DD?. admin. sysadmin. limited-admin. security officer.

A backup administrator needs to implement BoostFS for Windows. What do they need to install on the Windows server?. NFS. FUSE. CIFS. CBFS.

An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from physical tape. What is a consideration when configuring the tape size?. Use multiple drives to write multiple streams. Set retention periods for as long as possible. Target multiple drives to write single stream. Use larger tapes for multiple smaller datasets.

An engineer is configuring a PowerProtect DD system for VTL using Fibre Channel. How should the zones be configured?. Hard zones. Single initiator, multi target. Single initiator, single target. Soft zones.

An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high. What is the most likely cause of this behavior?. NVRAM failure. Disk failure. Expired segments. Known segments.

The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3. Which data movement policy is used to archive files into Azure Blob Storage?. App-driven. Age-based. Age-range. Recall.

An engineer is deploying two PowerProtect DD6900 systems in an HA pair. The installation includes ES40, DS60, and FS25 expansion shelves. What consideration should be made when cabling the hardware?. The FS25 shelf must be fully populated. The FS25 shelf should be cabled on a separate chain. The DS60 shelf should be cabled on a separate chain. The DS60 shelf must be populated with identical drives.

A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB. The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB. What is the weekly burn rate (GB) after six daily incremental backups and one weekly backup?. 200. 220. 400. 440.

What is the preferred method to ensure backups are protected against deletion or corrupt?. Encryption. Dell EMC Cloud Tier. Retention Lock. Data Invulnerability Architecture.

An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received. What is the reason for the failure?. The maximum number of snapshots has been exceeded. The user does not have the permission to retain more snapshots. There are not enough snapshot licenses. The DDOS needs to be upgraded.

A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server HBA are visible?. scsitarget initiator show list. scsitarget show initiator list. scsitarget show initiator. scsitarget initiator list.

Which command is used to check if NFS is enabled?. nfs enable. nfs status. nfs show clients. system show.

What is a requirement to use the PowerProtect DD HA feature?. Each head unit requires its own FS25 shelf. Head units and nodes require an active/active configuration. A single set of shared storage. Dual set of shared storage configuration.

What rule must be followed during an upgrade procedure with the FS25 expansion shelf?. FS25 shelf is cabled on a separate private chain. For high performance, the connections from a controller to FS25 shelves must be over FC cables. FS25 shelf must be on the same chain with DS60. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five.