HPE HPE0-S37

Which solution provides the lowest latency and highest bandwidth for network connectivity for UPC clusters?. InfiniBand FOR. 40Gb Ethernet. 16Gb Fibre Channel. InfiniBand QDR.

Which memory DIMM technology combines DRAM memory with flash memory to allow data to be retained in the event of power loss?. LRDIMM. RDIMM. UDIMM. NVDIMM.

What are competitive advantages of the HPE ProLiant Gen9 server? (Select two ). standard proactive care. lifetime warranty. lower power consumption and less floor Space. management of heterogeneous environments. increased storage capacity.

Which HPE cloud-based portal provides the ability to easily track service events and support cases and view device configurations?. HPE Insight Diagnostic. HPE insight Online. HPE Active Health System. HPE Agentiess Management Service.

A customer is considering the DL330 Gen9 as the platform standard tor Its VSAN cluster.The configuration will use 24 drives. Each 8-drive cage will contain 1 SSD and 7 SATA drives. Winch array controller should the architect recommend for this configuration?. HPE Dynamic Smart Array B3140i controller. HPE Smart Array P840 controller. HPE SAS Expander. HPE Flexible Smart Array P440ar controller.

What is a characteristic of HPE Agentless Management on ProLiant GenS and Gen9 servers?. It monitors thermal, power, and memory subsystems. It is automatically activated following the installation of an operating system. It requires management network ports to be enabled on the host operating system. It requires isolation of the management network from the data netwoik.

A customer needs to specify a firmware baseline for an HPE C7000 enclosure in HPE OneView Under which condition is this option available?. when the enclosure is monitored by HPE OneView. when a valid HP SUM image is uploaded to HPE OneView. when the enclosure is managed by HPE OneView. when a valid set of the smart Components is uploaded to HPE OneView.

Where can a customer verify that a specific operating system is supported on a given HPE ProLiant server?. in the Unified Extensible Firmware Interface (UEFI). in Smart Update Manager. in HPE Single Point ot Configuration Knowledge (SPOCK). on the operating system Support Matrix website-.

Which HPE option is required for using Location Discovery?. iL03 Management. HPE Power Distribution Units. HPE intelligent Provisioning. HPE intelligent Series Rack.

Which tool should an architect use to estimate data center cooling requirements for server configurations?. HPE Switch Selector. HPE iQuote Universal. HPE Power Advisor. HPE Sizer for Server Visualization.

Which statement describes out-of-band server management?. It enables proactive alerts on public interfaces-. It accesses the server through a dedicated network intertace. It logs into the operating system and changes the server properties. It connects to the file share on the server's operating system.

Which Intel Xeon processor supports up to 18 cores'?. E3-1200. E3-1200v5. E5-160O v3. E5-4600 v3.

What are the benefits of implementing bladed architecture instead of traditional rack mount servers? (Select two ). lower initial capital cost. shared memory architecture. more predictable MTBF. higher compute density. shared power and cooling.

A customer is deploying a new solution that requires a third party VoIP card. Which HPE BtadeSystem component is needed to be abIe to attach the customers existing BL460C Gen9 server blades to the VoIP card?. HPE OneView. HPE Storage Blade. HPE Smart Array P244br controller. HPE PCI Expansion Blade.

An architect designs a Synergy solution that will have five Compute Modules, each accessing a single, fully-populated Storage Module. How many P542D controllers are needed to complete this solution?.

What advantage does a blade system solution provide over a standard rack based server solution?. single phase power supplies. redundant network adapters. cable-less server installation. redundant SSD mirroring.

A customer needs a server solution that supports E3-1200 v5 processors. Which server model meets this requirement?.

What is a common benefit of using a Converged Network Adapter?. ability to switch between Ethernet and InfiniBand connectivity. hardware offload of SAS 3 O protocol. direct access to network card ROM from operating system. hardware offload of iSCSI protocol.

Which component requires HPE Insight Management Agents to he installed to verify prefailure warranty status?. hard disk. storage controller. memory. CPU.

Which options are offered in HPE Foundation Care services? (Select two ). single point contact through problem resolution. third-party OS support collaboration. health check on covered devices. access to firmware and software updates. pre-failure alerts on covered options.

A customer purchased 74x7 foundation Care HPE Care Packs to extend the length of service coverage. The customer purchased several DL560 Gen9 servers and needs to know which product to purchase to reduce parts issues, minimize down time, and extend service beyond the standard warranty period. Which product should the architect recommend to meet the customers need?. 3 year proactive Care with call to repair with DMR. 4 year Foundation Care 24x7 with DMR. 4 year Foundation care with call to repair with DME. 5 year Foundation Care with call to repair.

A customer needs to simplify server provisioning tasks with a tool that is capable of multiserver operating system and firmware provisioning for rack mount servers and Blade System servers. Which tool should the architect recommend to the customer?. insight Control. Service Pack for ProLiant. Insight Remote Support. Smart Update Manager (SUM.

What is a benefit of PCIe version 3 O over PCIe 2 0?. It supports InfiniBand in full throughput mode. It reduces the profile of the option cards. it decreases the base clock speed to save power. It doubles the total bandwidth on the bus.

What is a benefit of DDR4 memory?. new encoded chip scheme. lower energy consumption. compatible with DDR3. larger cache buffer size.

What do cluster environments use to identify node failures?. SNMP community strings. Heartbeats. OSPF link state advertisements. network interface driver diagnostic.

What can be used to facilitate the configuration of OS installations on HPE ProLiant Servers?. HPE Virtual Connect Manager. HPE iLO Federation. HPE intelligent Provisioning. HPE Smart Storage Administrato.

Which tool is used to configure HPE Secure encryption?. iLO. UEFI. SSA. SUM.

Which HPE technologies allow integration with HPE Intelligent Series Racks? (Select two ). HPE intelligent Management Center (IMC). HPE Insight Diagnostics Online Edition. HPE Platinum Power Supplies. HPE intelligent Provisioning. HPE OneView.

A customer selects the HPE c7000 with redundant FlexFabric-20/40 F8 Virtual connect modules for a private project. For the server platform, the customer plans to use the ProLiant BL460 Gen9 with the FlexFabric adapters installed. How many FlexNICs will be available per 20Gb port for the customer’s cloud services?. 1. 2. 4. 8.

Which approach protects server data against natural disasters'?. deploying the solution in two data centers in different geographic locations. configuring a redundant power subsystem at the server/enclosure level. implementing a redundant UPS solution. configuring storage replication within the data center.

An architect is using Sales Builder for Windows to create a configuration. The architect needs to generate a graphical view that can be used to modify the configuration. Which functionality should the architect use?. Whiteboard. Configurator Worksheet. Quoter. System Diagram.

What can an administrator use to install HPE Agentless Management Service'? (Select two). HPE Virtual Connect Manager. HPE Intelligent Provisioning. HPE iLO firmware. HPE Service Pack Tor ProLiant. HPE Virtual Connect Enteprise Manager.

Which HPE tool can be used to connect directly to HPF to register a Gen8/Gen9 ProLiant server for HPE Insight Remote Support?. HPE Insight Online. HPE Insight Diagnostic. HPE Intelligent Provisioning. HPE Onboard Administrator.

Which tool monitors the usage of Solid State Drives (SSD) to determine the estimated life of me drive?. HPE Offline Insight Diagnostics. HPE Smart Storage Administrator. HPE online insight Diagonal. HPE One View.

Which design concept is based on the principle of fluid resource pools?. Composable Infrastructure. Adaptive Infrastructure. The Idea Economy. Software-defined Storage.

Which methods can an administrator implement to provide higher security within a management network? (Select two.). SNMPV3. community stnngs. NTP. isolated VLAN. port mirroring.

A customer needs to increase security within a management network and add the ability to log in to an ILO by using domain credentials. Which component is required to enable this functionality?. TACACS+ server. dedicated Active Directory server. iLO Advanced license. redundant Onboard Administrato.

Which server components are monitored tor redundancy status by means of HPE Agentless Management? (Select two ). FlexibteLOM. power supply. Smart Array controller. fans. CPU.

Which primary area should an administrator consider to ensure adequate airflow and to provide space for servicing of servers in a data center?. the space on the sides of the rack. the space above and below the rack. the space between adjacent racks. the space in front and behind the rack.

When configuring Secure Boot in VMware ESXI. which option should the administrator enable?. Embedded UEFI Shell Options. ROM Based Setup Utility. UEFI Optimized Boot. Legacy Boot Mode.

A customer needs to eliminate thermal imbalance in its new data center. Which solution should the architect recommended to the customer?. any HPE iPDU. HPE Intelligent Network racks. HPE Rack Air Duck Kit. any Intelligent Series rack.

In which category is the IEC 60309 an industry standard?. Power. Airflow. Humidity. Space.

Which HP software product provides a single infrastructure and single management platform?. HPF Intelligent Provisioning. HPE Insight Remote Support. HPE Oneview. HPE Virtual Connect Enterprise Manager.

Which HPE tool can the administrator use to turn on enclosure identification UID?. HPE Insight Display. HPE Intelligent Provisioning. HPE OneView. HPE Virtual Connect Manager.

What is an industry recommended best practice when placing and populating a rack of equipment?. Place the heaviest Items in the top. and populate items from the top to the bottom. Place the heaviest items in the bottom, and populate items from the bottom to the top. Place the heaviest items on the bottom, and populate items from the top to the bottom. Place the heaviest items on the top, and populate items from the bottom to the top.

A customer needs to verify the warranty status of a server blade running an important database Which HPE tool can the customer use to verify the warranty or service contract status tor a specific server blade?. HPE insight Online. HPE Onboard Administrator. HPE Part Surfer. HPE intelligent Provisioning.

A customer needs a tower-based server mat supports an E3-1200 v5 processor with 7 to 4 cores Which server model should the architect recommend?. ML30. ML110. ML150. ML350.

A system administrator is concerned about a high number of visitors connecting to a company's network in addition to the production network traffic, the network infrastructure is used for the systems management traffic to the company's servers. What should the administrator do to separate traffic?. implement dynamic routing using the Open Shortest Path First (OSPF) protocol. Split the traffic using me Virtual Local Area Networks (VLAN). Create multiple Spanning Tree Protocol (STP) instances to carry different types of traffic. Change the priority of the traffic using the Quality of Service (QoS) feature.

What is a feature of HPE Onboard Administrator?. deploys a vanity of operating systems including Windows and Linux. reports blade server errors directly to HPE to quickly resolve problems. performs initial configuration steps of the enclosure. uses the UID to identify the enclosure.

A customers database is slow to respond, and the customer needs response times to of dramatically increased. Which solution should the architect recommend to achieve this result?. install a new disk drive and make it a hot spare. install a workload accelerator. Use IPv6 protocol instead of IPv4. install a redundant power supply to optimize load balancing.

Which modes of IT operations are bridged by HPE Composable infrastructure? (Select two). business centric. application centric. datacenter centric. IT centric. customer centric.

Which protocol is primarily used in servers to connect high performance disk drives to internal disk controllers?. FC. SAS. FCoE. iSCSI.

An administrator installs the Windows 2012 R2 operating system on a server with multiple network interface cards. The solution needs to have network adapter redundancy at the operating system level. What should the administrator do to meet this requirement?. Enable RDMA at the adapter level. Configure host-based VLANs. Configure intelligent Resilient Framework through an agent. Configure NIC teaming, using atleast two network adapters.

What is an advantage of RAID 6 over RAID 5?. lower cost. higher performance. easier implementation. higher data availability.

What is a feature of HPE Synergy Composer?. It updates resources without service interruption. It provides stateless compute boot images. it uses SATA SAS. of SSD drives for internal storage. It uses one Compute Slot, or two for redundancy.

What are two feature of the Synergy Computer Module? (Select two.). Embeds the HPE OneView Management solution. supports SAS, SATA( HDD . and Flash Storage. provides module templates to monitor and flag capabilities with remediation. uses one or two Appliance Bays for redundancy. provides support for four Micro-Form drives with built-in RAID.

Which storage standard evolved from mSATA?. SATAe. USB 3.0. M.2. miniSD.

A customer is considering a 10Gb Fiber media connectivity option for a newly purchased rack-based server. Which component is needed on the switch to connect this server to the network?. QSFP + module. XFP + module. SFP + module. SFP module.

A customer need s a server series that supports an E7-4800 V3 processor. Which server series should the architect recommend?. DL360 Gen9. DL380 Gen9. DL580 Gen9. ML150 Gen9.

Which blade enclosure component allows the aggregation of up to 16 iLO ports in an HPE c7000 enclosure?. HPE Flex Fabric 20/40 F8 module. HPE 40 Gb Ethernet Switch. HPE Virtual Connect Enterprise Manager. HPE Onboard Administrator.

A customer needs help simplifying the management of its current blade infrastructure solution. The customer also needs the ability to take advantage of REST API. HPE Virtual Connect Manger. HPE OneView. HPE Virtual Connect Enterprise Manger. HPE Insight Remote Support.

Which information can be obtained from HPE intelligent Series Racks with iPDUs?. the location of a serve within a rack. the placement of a standard PDU in a rack. the identification of a virtual machine in a host server. the type of a failed Replaceable Unit (FRU).

What should be verified before adding an HPE c7000 blade enclosure to HPE OneView?. UEFI management settings. Onboard Administrator firmware. ILO encryption key presence. Onboard Administrator stacking links.

Which statement describes the positioning of iLO4 Essentials license?. It provides standard ILO without KVM. it is used by cloud service providers. it enables complete HPE iLO Federation support. It fulfills SMB needs.

Which advantage do Solid State Drives provide over Hard Disk Drives?. parallel read/write. centralized firmware support. extended controller support. lower latency.

Which operations are allowed through the REST API on an object managed by HPE OneView?. formulate and delete object. reject and modify object. create and update object. migrate and read object.

Which HPE OneView component provides an overview of systems, activities, and alerts?. Map View. Activity Feed. Smart Search. Dashboard.

Which statement describes a server failure predictive capability?. It checks the free space on the disk partition. It monitors the amount of corrected memory errors. It verifies the disk controllers driver version. It uses the ping command to verify networking connectivity.

A customer selects the DL560 Gen9 with the Universal Media Bay as their platform standard. What is the maximum number of disk drives available in this configuration?. 8. 16. 18. 24.

A customer has a new server and needs to secure the operating system with the Secure Boot feature. Which operating system and boot mode combination will support this feature?. Windows 2008 and UEFI Boot Mode. Windows 2008 R2 Data Center Edition and UEFI Boot Mode. Windows 2012 R2 and Legacy Mode. Windows 2012 and UEFI Boot Mode.

A customer needs a server solution that supports E3-120Q v5 processors which server model meets this requirement?. ML1 110. DL20. DL380. DL560.

Which troubleshooting function is provided by HPE intelligent Provisioning?. downloads Active Health System logs. downloads Virtual Connect Support Dump. downloads operating system hot fixes. downloads operating system error logs.

When using HPE insight Management Agents, which component will provide notification of a pre-failure event to enable replacement without a scheduled downtime?. memory. CPU. hard disk. storage controller.

Which HPE Synergy component provides the embedded HPE OneView management solution?. HPE Synergy Compute Node. HPE Synergy Image Streamer. HPE Synergy 12000 Frame. HPE Composer.

Which product should an administrator use to configure power redundancy for an HPE c7000 enclosure?. HPE Insight Control Server Provisioning. HPE Onboard Administrator. HPE ILO Federation. HPE iPDU.

What is a key requirement for an administrator to configure a high availability cluster for a large database?. write cache. local disks without RAID. shared storage. optical heartbeat.

A customer needs to modify the configuration of Virtual Connect modules in a c7000 enclosure but when the administrator attempts to access Virtual Connect Manager the administrator is redirected to a different URL. What is a likely reason for this issue?. The enclosure is managed by HPE OneView. The stacking link of the HPE Onboard Administrator is disconnected. The Virtual Connect Manager and HPE Onboard Administrator firmware versions are incompatible. The Virtual Connect Manager license is not enabled.

An administrator needs to deploy VMware ESXI to HPE ProLiant servers. Which HPE recommended approach should the administrator take to achieve this goal?. Download and Install VMware ESXI to a USB and install. Use HPE OneView to deploy the HPE Custom ESXI image. Use the UEFI Custom shell to install the VMware ESXI image. Download the HPE Customer ESXI image form VMware and install.

A customer installs a server into an HPE Intelligent series rack. The newly installed server will not power up. What can cause this issue?. The server does not have the ILO advanced license installed and does not use Power Discovery Services power cables. The rack has standard PDU extension bars installed, and the server is using standard power cables. The server does not the iLO cable installed. The rack has IPDU G2 extension bars installed, and lockout is enabled.

What is a benefit of using a blade architecture over a standard rack-based server?. deploys blades by using UEFI. reduces connectivity complexity. provides independent networking components. monitors blades by using SNMP.

What is a common benefit of using a Converged Network Adapter?. ability to switch between Ethernet and InfinlBand connectivity. hardware offload of SAS 3.0 protocol. hardware offload of FCoE protocol. ability of the operating system to directly access network card ROM.

An administrator is unable to share the ILO graphic console on a DL380 Gen9 server with another administrator. What should the administrator check first to diagnose the problem?. whether the video cable is property connected to the ILO port. whether the shared remote console for this server is enabled on the OA level. whether single sign-on is enabled on the ILO. whether the ILO has the advanced license applied.

Which downloadable stand-alone application enables an architect to configure and quote enterprise servers?. HPE Power Advisor. HPE Sales Builder for Windows. HPE Switch Selector. HPE Server Memory Configurator.

Which Transformation objectives address customer challenges?. Flexible Investments. Agile and Flexible. Right IT Environment. Organizational Silos. Virtualization Storage.

Which feature does the HPE c3000 and c7000 enclosures have in common?. support for 16 Blade Servers. support for two HPE Onboard Administrators. support for 10 Power Supplies. 10U in total height.

Which HPE tool provides in-depth testing of critical hardware components for devices, such as processors, memory, and hard drives?. HPE Smart Storage Administrator. HPE insight Diagnostics Offline edition. HPE insight Diagnostics Online edition. HPE OneView.

A customer is Considering HPE Synergy for network consolidation. How does HPE Synergy’s Rack Scale Fabric assist the customer with network consolidation?. eliminates the need for cables. eliminates the need for TCP/IP. eliminates the need for VLANs. eliminates the need for of rack switches.

A customer needs to consolidate its standard server SAN- and LAN-based infrastructure to a blade enclosure converged-based solution. Which components should the architect include in the proposal to help meet the customer’s needs? (Select two.). HPE Flex Fabric 20/40 FB Virtual Connection module. HPE 6125XLG Ethernet Switch. HPE Insight Remote Support. HPE OneView. HPE 8Gb Fibre Channel Switch.

On which standard is the REST API based?. IGMP. UEFI. HTTP. TFTP.

After installing DIMM in all of the memory slots on a DL380p Gen9, only half of the memory can be seen. What is a probable cause of this issue?. Only one processor is installed. Half of the DIMMs are a slower speed than the other half. Half of the DIMMs, are 1.35 volts, and the rest are 1.50 volts. Hyper-threading is not enabled in the RBSU.

Which networking products help a customer build a converged network infrastructure based on HPE Blade System? (Select two.). HPE 40Gb Ethernet Switch. HPE Redundant Onboard Administrator. HPE Flexible Network Adapters. HPE 8Gb Brocade Fibre Channel Switch. HPE Flex Fabric 20/40 F module.

What differentiates LRDIMM from RDIMM memory?. unbuffered address lines. number of ECC bit. flash memory support. buttered data bits.

Which technology service provides a choice for an economical hardware and software support service for HPE Care Packs?. HPE Education Service. HPE Foundation Care. HPE Proactive Care. HPE Datacenter Care.

A customer has a mix of HPE ProLiant DL 380 Gen9 servers and an HPE BladeSystem c7000 enclosure with HPE ProLiantBL460 Gen9 server blades. The customer needs to generate an inventory list and document server configurations. Which solution should the architect recommend to the customer?. ILO 4 interface. HPE Converged infrastructure Solution Sizer Suite. RESTful interface Tool. Remote Assistant.

Which value prepositions are provided with the HPE Synergy master/satellite architecture? (Select two.). zero touch change management. top of rack switch design. 40 percent or more lower fabric hardware costs. redundant HPE Onboard Administrators. SAS fabric consolidation.

Which functionality is enabled by UEFI Boot Mode?. secure boot. HPE iLO Federation. HPE Intelligent Provisioning. pre-boot configuration.

Click and drag the HPE configuration tool on the left to its matching description on the right. HPE ELITE. HPE SOURCE. HPE SWITCH SELECTOR. HPE NETWORKING ONLINE CONFIGURATOR. HPE PARTSURFER.

HPE Synergy. HPE SYNERGY FRAME LINK MODULE. HPE SYNERGY D3940. HPE SYNERGY COMPOSER. HPE SYNERGY IMAGE STREAMER.

Memory. UDIMM. RDIMM. LRDIMM. NVDIMM.

Click and drag the business challenge on the left to match it with competitive advantage provided by implementing a hybrid infrastructure on the right Business Challenge vs Competitive Advantage. Inefficient Operations. Locket in by legasy investment. Rigid It enviroments. Technical and organizational silios.

Feature of HPE ILO Advanced vs HPE Proliant DL Servers. Virtual Media. Shared Console. Serial Record. Graphical remote console.

Sales Builder Component vs Description. Whiteboard. Configurator Worksheet. Quoter. Price Book. Knowledge Base.

A server administrator needs to find more information about a hardware issue on a server blade. The administrator is not sure which server blade is involved. Click the menu option that will help the administrator find additional details in the shortest amount of time.

What is the competitive advantage to customers to implementing a rack-scale fabric?. multiple fabrics spanning multiple frames. multiple fabrics within a single frame. single fabric in a single frame. single fabric spanning multiple frames.